Effect of Ribbed Target Plate on Impingement Cooling

Authors

• Roaad K. Mohammed, Oil Production Distribution Company ,Ministry of Oil, Baghdad, Iraq
• Shaimaa A. Naser, Nanotechnology and Advanced Materials Research Center, University of Technology- Iraq, Baghdad, IraqFollow

Document Type

Article

Keywords

Impingement cooling, Target plate, Air jet, Ribbed plate

Abstract

This study experimentally investigates the heat transfer characteristics of an air jet impinging on smooth and ribbed target plates. Key variables examined include jet velocity, orifice diameter, and orifice-to-plate distance ratio (Z/D). Results show that the maximum heat transfer rate occurs at the stagnation point on the target plate. Increasing jet velocity significantly enhances heat transfer due to heightened turbulence, while larger orifice diameters yield higher heat transfer rates by covering a greater impact area. The optimal Z/D ratio for maximum heat transfer was determined to be 6 for all Reynolds numbers tested. However, introducing ribs to the target plate reduces heat transfer due to flow redirection and kinetic energy loss. These findings contribute to optimizing impingement cooling systems for various industrial applications.

How to Cite This Article

Mohammed, Roaad K. and Naser, Shaimaa A. (2023) "Effect of Ribbed Target Plate on Impingement Cooling," Babylonian Journal of Mechanical Engineering: Vol. 1: Iss. 1, Article 10.
DOI: https://doi.org/10.58496/BJME/2023/010

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.